Preparation
Product Range
Product Range
Do I have to use Dimension 4 under DWD?
For Preparing Timber
Dimension 4®
A timber stabilising pre-treatment which prolongs the life of DWD and other compatible finishes. It protects timber from staining, sun, water and mould damage during the construction period and prior to coating. Dimension 4 stabilises timber by reducing water absorption, cupping, splitting, checking, fading and staining.IMPORTANT: In order to provide a foundation for long term timber protection Dimension 4 must be overcoated with either DWD or other compatible finishes within three months of application. Where To Use
On all exterior timber including bare, clean, new or old, sawn or dressed timber cladding, weatherboards, window frames, joists, bearers, decking, pergolas, log homes and structural timbers. Also used for back priming timber weatherboards and interior lining for wet areas. Gloss Level
N/A
Preparation
Clean all timber with Reviva. Treat with TSS if in humid, tropical or mould susceptible areas.
Clean all timber with Reviva. Treat with TSS if in humid, tropical or mould susceptible areas.
Apply With
Brush, spray, applicator or roller.
Brush, spray, applicator or roller.
No. of Coats Required
1 heavy coat or 2 wet-on-wet flood coats.
1 heavy coat or 2 wet-on-wet flood coats.
Recoat Time
Minimum 4 hours recoat
Minimum 4 hours recoat
Drying/curing Time
Touch Dry: 1 hr
Walk On: 4 hours
Full Cure: 7 days
Touch Dry: 1 hr
Walk On: 4 hours
Full Cure: 7 days
Coverage Rate m2/L
Rough Sawn Timber 2-5mē per litre
Sawn Timber 5-7mē per litre
Dressed Timber 7-10mē per litre
(square metres per litre)*
Rough Sawn Timber 2-5mē per litre
Sawn Timber 5-7mē per litre
Dressed Timber 7-10mē per litre
(square metres per litre)*
Sand Between Coats
No.
No.
Clean Up With
Water.
Water.
Packaging Sizes
1, 4 and 10L.
Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.
1, 4 and 10L.
Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.
*Coverage rates are subject to variation between different timber species. To ensure adequate timber protection, this coverage should not be exceeded.
